
Master epoxy anti-corrosion primer 1:1 (0.5+0.5 l) Gray NEW, 0.5 l+0.5 l PROFILINE
SKU: PF-MASTER-1-1-0-5-05-C-HOB-HKA--50|Made to order
10,480 ₸

АвтоПрофи
ТОО "АвтоПрофи"
KazakhstanVisit store →
Contact the seller
Number hiddenDelivery calculated individually
Contact the seller to confirm the delivery cost
MASTER Epoxy Primer 1:1 epoxy primer
Epoxy primer for bare metal — maximum corrosion protection.
Application
• Priming bare metal after rust removal
• Isolation of old coatings before overcoating
• Protection of welds and underbody
• Base for putty and acrylic primers
Composition
• Two-component epoxy primer
• Mixing ratio 1:1
• Hardener included
• Volume: 0.5 l + 0.5 l
• Color: gray
Advantages
• Best corrosion protection among primers
• Completely isolates metal from moisture
• Can be puttied directly over it
• Adheres to bare metal without etching
Properties
• Type: epoxy, anti-corrosion
• Mixing: 1:1
• Volume: 0.5 l + 0.5 l
• Color: gray
Directions for use
Mix components 1:1 by volume, allow induction time according to the instructions. Apply with a spray gun in 1–2 coats. Allow flash-off before applying the next material — time is indicated on the packaging.
Materials
• bare steel
• galvanized steel
• aluminum
• welds
• areas after rust removal
Quantity per package: 6
Size: 0.5 l + 0.5 l
Manufacturer: TROTON Sp. z o.o. (MASTER), Poland
No specifications provided
MASTER Epoxy Primer 1:1 epoxy primer
Epoxy primer for bare metal — maximum corrosion protection.
Application
• Priming bare metal after rust removal
• Isolation of old coatings before overcoating
• Protection of welds and underbody
• Base for putty and acrylic primers
Composition
• Two-component epoxy primer
• Mixing ratio 1:1
• Hardener included
• Volume: 0.5 l + 0.5 l
• Color: gray
Advantages
• Best corrosion protection among primers
• Completely isolates metal from moisture
• Can be puttied directly over it
• Adheres to bare metal without etching
Properties
• Type: epoxy, anti-corrosion
• Mixing: 1:1
• Volume: 0.5 l + 0.5 l
• Color: gray
Directions for use
Mix components 1:1 by volume, allow induction time according to the instructions. Apply with a spray gun in 1–2 coats. Allow flash-off before applying the next material — time is indicated on the packaging.
Materials
• bare steel
• galvanized steel
• aluminum
• welds
• areas after rust removal
Quantity per package: 6
Size: 0.5 l + 0.5 l
Manufacturer: TROTON Sp. z o.o. (MASTER), Poland
10,480 ₸
1