1/3

Rebar mesh production line (automatic)
SKU: SRW2400|Made to order
46,897,900 ₸

SilkRailWay
ТОО SilkRailWay
KazakhstanVisit store →
Contact the seller
Number hiddenDelivery calculated individually
Contact the seller to confirm the delivery cost
Welded reinforcing mesh:
Welded reinforcing mesh, also simply called construction mesh, is used for reinforcing brickwork, foundation screed, and plastering works. Welded mesh can be used for reinforcing reinforced concrete structures, monolithic floor slabs and coverings, constructing monolithic belts, protective steel fences, strengthening existing floors during reconstruction, and any other purposes where reinforcement installation is required.
Operation process of the welding line:
Pre-cut measured cross bars, cut using a straightening-and-cutting machine, are fed by the operator via an overhead crane or lifting mechanism into the hopper of the cross bar feeding module. Longitudinal measured bars are loaded directly into the longitudinal bar feeding module. This reduces the downtime of the welding machine by loading bars into the feeding position to the welding portal during the production of the previous mesh. After the start command is issued, the mesh begins to be welded on the welding portal. The mesh is then advanced the full length by the servo drive of the longitudinal movement module. In the stacking module, the mesh is stacked into a pile.
Welding machine parameters:
Welding width 2500 mm
Welding wire diameter 5-12 mm
Number of welding points 24
Welding method pneumatic
Welded mesh 100 mm-300 mm (adjustable)
Welding speed 60-80 times/minute
Transformer power Water-cooled transformer 200 kVA*12
Mesh pulling method Traction mesh for servo motor
Longitudinal wire feeding method Pneumatic wire feeding after straightening and cutting
Cross wire feeding method Automatic feeding system for straightening and cutting the strip (1 ton storage rack)
Welding method Pneumatic welding
Wire ejection method Stepper motor wire drop
External adapter transformer Not less than 300 kVA at a distance of 100 m
External power cord 120 m3 of copper wire or 300 m3 of aluminum wire
Machine weight 6000 kg
Working zone 35*10 m
High-speed straightener parameters:
Straightening rod diameter Steel rod strength Φ6-Φ12 σs≦335 MPa
Steel rod strength Φ6-Φ10 σs≦400 MPa
Cut to length 800 mm-12000 mm (can also be extended according to user needs)
Cutting speed Frequency conversion speed adjustment 0-130 m/min
Fixed length error ≦ ± 1 mm
Straightness of steel rod after straightening ≦±2 mm/n
Motor power Cutting motor 7.5 kW
Straightening motor 45 kW
Machine weight 5600 kg
Main frame dimensions 32640×1125×1310 mm
* Please check prices, as they may change depending on exchange rates and logistics.
* With us, you can order this equipment and any other, through our equipment sourcing service
No specifications provided
Welded reinforcing mesh:
Welded reinforcing mesh, also simply called construction mesh, is used for reinforcing brickwork, foundation screed, and plastering works. Welded mesh can be used for reinforcing reinforced concrete structures, monolithic floor slabs and coverings, constructing monolithic belts, protective steel fences, strengthening existing floors during reconstruction, and any other purposes where reinforcement installation is required.
Operation process of the welding line:
Pre-cut measured cross bars, cut using a straightening-and-cutting machine, are fed by the operator via an overhead crane or lifting mechanism into the hopper of the cross bar feeding module. Longitudinal measured bars are loaded directly into the longitudinal bar feeding module. This reduces the downtime of the welding machine by loading bars into the feeding position to the welding portal during the production of the previous mesh. After the start command is issued, the mesh begins to be welded on the welding portal. The mesh is then advanced the full length by the servo drive of the longitudinal movement module. In the stacking module, the mesh is stacked into a pile.
Welding machine parameters:
Welding width 2500 mm
Welding wire diameter 5-12 mm
Number of welding points 24
Welding method pneumatic
Welded mesh 100 mm-300 mm (adjustable)
Welding speed 60-80 times/minute
Transformer power Water-cooled transformer 200 kVA*12
Mesh pulling method Traction mesh for servo motor
Longitudinal wire feeding method Pneumatic wire feeding after straightening and cutting
Cross wire feeding method Automatic feeding system for straightening and cutting the strip (1 ton storage rack)
Welding method Pneumatic welding
Wire ejection method Stepper motor wire drop
External adapter transformer Not less than 300 kVA at a distance of 100 m
External power cord 120 m3 of copper wire or 300 m3 of aluminum wire
Machine weight 6000 kg
Working zone 35*10 m
High-speed straightener parameters:
Straightening rod diameter Steel rod strength Φ6-Φ12 σs≦335 MPa
Steel rod strength Φ6-Φ10 σs≦400 MPa
Cut to length 800 mm-12000 mm (can also be extended according to user needs)
Cutting speed Frequency conversion speed adjustment 0-130 m/min
Fixed length error ≦ ± 1 mm
Straightness of steel rod after straightening ≦±2 mm/n
Motor power Cutting motor 7.5 kW
Straightening motor 45 kW
Machine weight 5600 kg
Main frame dimensions 32640×1125×1310 mm
* Please check prices, as they may change depending on exchange rates and logistics.
* With us, you can order this equipment and any other, through our equipment sourcing service
46,897,900 ₸
1

